Glycol - Coolflow IGE

Coolflow IGE Ethylene Glycol 25 litre

Part number: G701455
Manufacturer number: COOLFLOW IGE
Glycol - Coolflow IGE
Please Login or Register to see your Prices & Place Orders
Login or Register
Model numberCOOLFLOW IGE
Coolflow IGE is based on Ethylene Glycol and has been especially formulated for use as an... more
Product information - Coolflow IGE Ethylene Glycol 25 litre
Coolflow IGE is based on Ethylene Glycol and has been especially formulated for use as an Industrial Grade Secondary Refrigerant Antifreeze for use in Process Cooling, Refrigeration and Air Conditioning systems, where toxicity is not an issue.

Optimum Flow: Coolflow IGE has improved heat transfer characteristics, including; lower Dynamic Viscosity and higher Thermal Conductivity.
For detailed comparison please refer to the Fluid Performance Chart - available upon request.
Protection: Coolflow IGE contains synergistic corrosion inhibitors to protect metals commonly found in such systems. It has been tested in accordance with BS5117 and found to meet BS6580 and ASTM D1384 corrosion standards.
Coolflow IGE also contains scale and biological inhibitors to help prevent fouling - thus promoting long operational life and high thermal efficiency.
Application: As per BSRIA guide BG 29/2012 all pipe-work systems should be clean and free from biological contamination and debris prior to commissioning. To minimise corrosion air ingress a should be minimized. A pressurised system is best. Determine the total system volume and add Coolflow IGE to the system according to the minimum operating temperature required (see table). The minimum dose of Coolflow IGE should not be less than 25% of the system volume and the maximum does not normally exceed 60%. We recommend the use of deionised, distilled or UltraPure™ water for this dilution. Avoid water containing high levels of calcium salts or Chlorides [Cl-]. Coolflow IGE can also be supplied as a Ready-To-Use solution.
Diluting Concentrate: When measuring the percentage concentration of Coolflow IGE in solution we recommend the use of a recently calibrated refractometer. Enquire for more information

Model numberCOOLFLOW IGE
Last viewed